manualshive.com logo in svg

Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008, Administration Manual

The Novell ZENworks Linux Management 7.2 IR2 Administration Manual is a comprehensive guide for managing Linux systems. This manual covers all aspects of administration, from installation to troubleshooting. Download this free manual from 88.208.23.73:8080 to maximize the efficiency of your Linux management tasks.

Share
Download
background image

238

Novell ZENworks 7.2 Linux Management Administration Guide

n

ov

do

cx (e

n)

  11
 Ju

ly 20

08

Description: 

Displays a short description of the bundle's contents. This description 

displays in the ZENworks Control Center interface and in the ZENworks Linux 
Management Update Client, which is the user interface. You can edit the description.

Enforce Persistence: 

(Selected by default.) If this option is selected, the packages inside 

the RPM bundle are initially installed according to the bundle's schedule and the packages 
are reinstalled on assigned devices if they are removed in the future. If this option is not 
selected, the packages are installed initially according to schedule, but the packages are 
not checked to see if they have been removed from assigned devices and the packages are 
never reinstalled. This option applies to RPM bundles only; it does not apply to preboot, 
file, or Dell Update Package (DUP) bundles.

3b

Review the information in the 

Packages

 section, then make the desired configuration 

changes.
The 

Packages

 section displays the RPM packages contained in the selected bundle. Use 

the 

Packages

 section to upload RPM packages to the bundle, to import RPM packages 

contained in the ZENworks Linux Management package repository, or to remove 
packages from a bundle. The packages that you upload to a bundle must already exist on 
the local device on which you are running the ZENworks Control Center, or you can 
import packages from the package repository.
You can use the following options:

Upload RPM: 

Click 

Add

 > 

Upload RPM

 to open the RPM File Upload dialog box. For 

more information, see 

Step 6a on page 214

.

Import from repository: 

Click 

Add

 > 

Import from repository

 to open the Package Import 

dialog box. For more information, see 

Step 6b on page 216

.

Remove: 

Click 

Remove

 to remove the selected packages from the bundle, as needed. The 

packages removed from the deployed version of the bundle are uninstalled from the 
managed devices only when a new version of the bundle is deployed. 
To remove the patch RPMs from the YOU patch bundle, you must first create a copy of 
the YOU patch bundle, then remove the patches from the copied version of the bundle. 
To create a copy of the YOU patch bundle:

1. Click the 

Copy

 button located at the top of the page. 

2. In the Copy dialog box, specify a name for the copy version. 
3. Click 

OK

. 

You cannot install the copied version of the YOU patch bundle if it contains only scripts. 

Set Freshen: 

Click 

Action

 > 

Set Freshen 

to transact a package only if a previous version 

of the package is already installed on the device. You can use the Freshen option in 
conjunction with the Auto-Detect, Update, or Install options available in 

Edit

.

Unset Freshen: 

Click 

Action

 > 

Unset Freshen 

to turn off Freshen; the package is 

transacted regardless if the package is already installed on the device or not.

Edit: 

Click 

Action

 > 

Edit 

to display the RPM File Upload dialog box where you can 

change the selected package's install type and 

Freshen 

option.

Install type: 

Click 

Action

 > 

Edit > Install Type 

to use the Install type drop-down list to 

choose from the following installation options:

Š

Auto-detect: 

Automatically detects whether the bundle is already installed on 

assigned devices and either installs the bundle or updates an existing bundle, if 
necessary. Basically, the 

Auto-detect

 option determines whether the 

Update

 or the 

Summary of Contents for ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008



































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008

F-SECURE PSB Administrator'S Manual preview
PSB
Brand: F-SECURE Pages: 43
TAA Amanda User Manual preview
Amanda
Brand: TAA Pages: 28
Yellowtec b-line Manual preview
b-line
Brand: Yellowtec Pages: 124
Campbell Baler Instruction Manual preview
Baler
Brand: Campbell Pages: 16
AMX IREDIT V1.2 Instruction Manual preview
IREDIT V1.2
Brand: AMX Pages: 54
GRASS VALLEY EDIUS NEO 3 Datasheet preview
EDIUS NEO 3
Brand: GRASS VALLEY Pages: 2
Autodesk ARCHITECTURE 2010 Brochure preview
ARCHITECTURE 2010
Brand: Autodesk Pages: 4
DigiDesign Pro Tools Reference Manual preview
Pro Tools
Brand: DigiDesign Pages: 886
Macrovision Corporation SAMREPORT-LITE 2006 Manual preview
SAMREPORT-LITE 2006
Brand: Macrovision Corporation Pages: 36
MACROMEDIA DIRECTOR MX 2004-GETTING STARTED WITH... Getting Started preview
DIRECTOR MX 2004-GETTING STARTED WITH...
Brand: MACROMEDIA Pages: 68
IBM Telelogic Directory Server Installation Manual preview
Telelogic Directory Server
Brand: IBM Pages: 26
Oregon Scientific X-Cable User Manual preview
X-Cable
Brand: Oregon Scientific Pages: 8
Garmin 010-10844-00 - Mobile XT - GPS Software Owner'S Manual preview
010-10844-00 - Mobile XT - GPS Software
Brand: Garmin Pages: 52
Velocity SEAL-IT SEAL-IT 100 User Manual preview
SEAL-IT SEAL-IT 100
Brand: Velocity Pages: 38
Garmin Samsung Mobile Navigator Quick Start Manual preview
Samsung Mobile Navigator
Brand: Garmin Pages: 12
Garmin Nuvi 285WT - Automotive GPS Receiver Quick Start Manual preview
Nuvi 285WT - Automotive GPS Receiver
Brand: Garmin Pages: 12
Garmin Mobile PC User Manual preview
Mobile PC
Brand: Garmin Pages: 12
Garmin Laptop (Spanish) Manuel De Démarrage Rapide preview
Laptop
Brand: Garmin Pages: 12

Brands by name

Popular brands

Load more brands