Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008 Administration Manual Download

Page: 523 / 674

Generating ZENworks Reports

523

cx (e

11
Ju

ly 20

Generating ZENworks Reports

This section includes the following topics:

Section 42.1, “Creating a Folder,” on page 523

Section 42.2, “Creating a Report,” on page 524

Section 42.3, “Organizing Reports and Folders,” on page 527

Section 42.4, “Modifying Report Details,” on page 528

Section 42.5, “Generating Reports,” on page 529

Section 42.6, “Exporting Reports,” on page 529

Section 42.7, “Resetting Default Reports,” on page 530

42.1 Creating a Folder

You create folders to store ZENworks

reports.

In the ZENworks Control Center, click the

Reports

tab.

Click

New > Folder

Specify the name and folder location.
You can browse to select an existing folder in which to store the new folder.

Enter a report description, if necessary, then click

The system displays the new folder on the Reports page, as follows:

Summary of Contents for ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008



































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008

Reviews:

Related manuals for ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008

Brands by name

Popular brands

Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008, Administration Manual

Search results

Summary of Contents for ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008

Reviews:

Related manuals for ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008

Brands by name

Popular brands