manualshive.com logo in svg

Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008, Administration Manual

The Novell ZENworks Linux Management 7.2 IR2 Administration Manual is a comprehensive guide for managing Linux systems. This manual covers all aspects of administration, from installation to troubleshooting. Download this free manual from 88.208.23.73:8080 to maximize the efficiency of your Linux management tasks.

Share
Download
background image

Generating ZENworks Reports

529

n

ov

do

cx (e

n)

  11
 Ju

ly 20

08

42.5  Generating Reports

You can generate an existing report, or generate multiple reports simultaneously. After the system 
displays the report, you can print the information or export and view the data in HTML, CSV, or 
XML formats. 

1

In the ZENworks Control Center, click the 

Reports

 tab.

2

To generate a report, select the report’s check box, then click 

Generate

.

or

3

To generate a batch of reports, select the report folder’s check box, then click 

Generate

.

You can also select individual reports and run them simultaneously.

The following graphic is a sample of a generated ZENworks report.

Figure 42-1   

Report Generation Page

42.6  Exporting Reports

There are two ways to export a report to HTML, CSV, or XML: you can generate the report and then 
export it, or you can export it directly without generating it first.

To generate the report and then export it:

1

Generate a report as described in 

Section 42.5, “Generating Reports,” on page 529

.

2

Click 

HTML

, 

CSV

, or 

XML

.

To export a report directly:

1

In the ZENworks Control Center, click the 

Reports

 tab.

2

Select the check box of the report you want to export. (This feature is only available for single 
items.)

3

Click 

Action

 and select the desired format. 

Summary of Contents for ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008



































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008

F-SECURE PSB Administrator'S Manual preview
PSB
Brand: F-SECURE Pages: 43
Aastra Venture IP Telephone System Software Manual preview
Venture IP Telephone System
Brand: Aastra Pages: 10
ADS Technologies ADS INSTANT MUSIC Quick Start Manual preview
ADS INSTANT MUSIC
Brand: ADS Technologies Pages: 5
TANDBERG Movi 3.0 User Manual preview
Movi 3.0
Brand: TANDBERG Pages: 10
Sybase Adaptive Server Anywhere SNMP Extension Agent User Manual preview
Adaptive Server Anywhere SNMP Extension Agent
Brand: Sybase Pages: 70
FARONICS POWER SAVE MAC Manual preview
POWER SAVE MAC
Brand: FARONICS Pages: 34
Red Hat NETWORK - USER 1.2 User Reference Manual preview
NETWORK - USER 1.2
Brand: Red Hat Pages: 64
McAfee VIRUSSCAN 5.1 User Manual preview
VIRUSSCAN 5.1
Brand: McAfee Pages: 315
Native Instruments Scarbee A-200 User Manual preview
Scarbee A-200
Brand: Native Instruments Pages: 16
IBM WebSphere Adapters User Manual preview
WebSphere Adapters
Brand: IBM Pages: 226
TANDBERG MOVI 4.0 - ADMINISTRATOR GUIDE 09-2010 Administrator'S Manual preview
MOVI 4.0 - ADMINISTRATOR GUIDE 09-2010
Brand: TANDBERG Pages: 22
Garmin 010-10844-00 - Mobile XT - GPS Software Quick Start Manual preview
010-10844-00 - Mobile XT - GPS Software
Brand: Garmin Pages: 8
Xerox FREEFLOW 701P25032 System Manual preview
FREEFLOW 701P25032
Brand: Xerox Pages: 112
Waves Linear-Phase MultiBand Software Audio... User Manual preview
Linear-Phase MultiBand Software Audio...
Brand: Waves Pages: 27
ACRONIS SNAP DEPLOY 3 - FOR WORKSTATION Installation Manual preview
SNAP DEPLOY 3 - FOR WORKSTATION
Brand: ACRONIS Pages: 13
ACRONIS SNAP DEPLOY 3 - FOR WORKSTATION Manual preview
SNAP DEPLOY 3 - FOR WORKSTATION
Brand: ACRONIS Pages: 103
Adobe 65015459 - Contribute CS4 User Manual preview
65015459 - Contribute CS4
Brand: Adobe Pages: 58
Adobe 38040334 - Dreamweaver CS3 User Manual preview
38040334 - Dreamweaver CS3
Brand: Adobe Pages: 738

Brands by name

Popular brands

Load more brands