manualshive.com logo in svg

Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008, Administration Manual

The Novell ZENworks Linux Management 7.2 IR2 Administration Manual is a comprehensive guide for managing Linux systems. This manual covers all aspects of administration, from installation to troubleshooting. Download this free manual from 88.208.23.73:8080 to maximize the efficiency of your Linux management tasks.

Share
Download
background image

578

Novell ZENworks 7.2 Linux Management Administration Guide

n

ov

do

cx (e

n)

  11
 Ju

ly 20

08

package name, package version, and package architecture respectively. The Status field is 
empty if the package is not installed, and displays “i” if the package is installed, or “v” if the 
package is installed but is of a different version compared to the one displayed in the list.
The description of these columns is the same with other package commands.
If the --show-nevra option is specified, the output for this command is presented in the Status, 
Bundle, Name, Epoch, Version, Release, and Arch columns.

patch-search (pse) [options] [querystring]

 

Searches for patches matching a pattern. Accepts the following option flags: 

--match-all - Requires patches to match all search strings (default). 
--match-any - Allows patches to match any search string. 
--match-substrings - Matches search strings against any part of text. 
--match-words - Requires search strings to match entire words. 
-d, --search-descriptions - Searches in patch descriptions, but not patch names. 
-i, --installed-only - Shows only patches that are already installed. 
-u, --uninstalled-only - Shows only patches that are not currently installed. 
-c, --catalog - Shows only the patches from the catalog you specify. 
--sort-by-name - Sorts patches by name (default). 
--sort-by-catalog - Sorts patches by catalog, not by name. 

remove (rm) [options] [package] [...]

 

Removes the specified packages. Accepts the following option flags: 

-N, --dry-run - Tests and displays, but does not actually perform the requested actions. 
-i, --confirm - Prompts for confirmation.
-y, --no-confirm - Does not prompt for confirmation.

rollback (ro) [options] [date or check point]

 

Rolls back package transactions to the time and date you specify. Sets the rollback preference, 
which is disable by default. Accept the following option flags:

-d, --download-only - Only downloads packages.
-p, --package - Name of the package that needs to be rolled back. 
-N, --dry-run - Tests and displays, but does not actually perform the requested actions. 
-i, --confirm - Prompts for confirmation.
-y, --no-confirm - Does not prompt for confirmation.

search (se) [options] [querystring]

 

Searches for packages matching a pattern. Accepts the following option flags: 

--match-all - Requires packages to match all search strings (default). 
--match-any - Allows packages to match any search string. 
--match-substrings - Matches search strings against any part of text. 
--match-words - Requires search strings to match entire words. 
-d, --search-descriptions - Searches in package descriptions, but not package names. 
-i, --installed-only - Shows only packages that are already installed. 
-u, --uninstalled-only - Shows only packages that are not currently installed. 

Summary of Contents for ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008



































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008

TANDBERG Codian Remote Management API Reference Manual preview
Codian Remote Management API
Brand: TANDBERG Pages: 66
Alarm Lock User Access Control (UAC) in Windows® Vista Tech Note preview
User Access Control (UAC) in Windows® Vista
Brand: Alarm Lock Pages: 2
KAPERSKY ANTI-VIRUS 5.1 - FOR MICROSOFT ISA SERVER Administrator'S Manual preview
ANTI-VIRUS 5.1 - FOR MICROSOFT ISA SERVER
Brand: KAPERSKY Pages: 67
Red Hat ENTERPRISE LINUX WS 2.1 - Installation Manual preview
ENTERPRISE LINUX WS 2.1 -
Brand: Red Hat Pages: 110
Red Hat CLUSTER SUITE FOR ENTERPRISE LINUX 4.5 Installation Manual preview
CLUSTER SUITE FOR ENTERPRISE LINUX 4.5
Brand: Red Hat Pages: 110
EverFocus PowerVideo Plus User Manual preview
PowerVideo Plus
Brand: EverFocus Pages: 80
F-SECURE PSB - ADMINISTRATORS GUIDE FOR CUSTOMERS Manual preview
PSB - ADMINISTRATORS GUIDE FOR CUSTOMERS
Brand: F-SECURE Pages: 40
FieldServer FS-8704-14 EtherNet Driver Manual preview
FS-8704-14 EtherNet
Brand: FieldServer Pages: 30
PressReader Android Tablet Software User Manual preview
Android Tablet Software
Brand: PressReader Pages: 4
Native Instruments Scarbee MM-Bass User Manual preview
Scarbee MM-Bass
Brand: Native Instruments Pages: 39
IBM TIVOLI ADSTAR 5697-VM3 User Manual preview
TIVOLI ADSTAR 5697-VM3
Brand: IBM Pages: 62
LinPlug SaxLab User Manual preview
SaxLab
Brand: LinPlug Pages: 40
LinPlug RMV Reference Manual preview
RMV
Brand: LinPlug Pages: 154
Harman Kardon SIGNATURE 2.0 Instruction & Operation Manual preview
SIGNATURE 2.0
Brand: Harman Kardon Pages: 19
Asus W5FE User Manual preview
W5FE
Brand: Asus Pages: 92
Lenovo ThinkCentre A61e Specifications preview
ThinkCentre A61e
Brand: Lenovo Pages: 4
Lenovo ThinkCentre A62 Reference Manual preview
ThinkCentre A62
Brand: Lenovo Pages: 134
Lenovo ThinkCentre A63 Hardware Maintenance Manual preview
ThinkCentre A63
Brand: Lenovo Pages: 216

Brands by name

Popular brands

Load more brands