manualshive.com logo in svg

Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008, Administration Manual

The Novell ZENworks Linux Management 7.2 IR2 Administration Manual is a comprehensive guide for managing Linux systems. This manual covers all aspects of administration, from installation to troubleshooting. Download this free manual from 88.208.23.73:8080 to maximize the efficiency of your Linux management tasks.

Share
Download
background image

Command Line Utilities

579

n

ov

do

cx (e

n)

  11
 Ju

ly 20

08

-c, --catalog - Shows only the packages from the catalog you specify. 
--sort-by-name - Sorts packages by name (default). 
--sort-by-catalog - Sorts packages by catalog, not by name. 
--show-nevra - Shows the NEVRA details of the packages.
--show-duplicates - Shows the duplicate packages available in all catalogs. 
If the --show-nevra option is not specified, the output for this command is presented in Status, 
Catalog, Bundle, Name, Version, and Arch columns. These provide the details of every 
package that is part of the given bundle. Catalog, Bundle, Name, Version, and Arch represent 
the catalog name, bundle name, package name, package version, and package architecture 
respectively. The Status field is empty if the package is not installed, and displays “i” if the 
package is installed, or “v” if the package is installed but is of a different version compared to 
the one displayed in the list.
The description of these columns is the same with other package commands.
If the --show-nevra option is specified, the output for this command is presented in the Status, 
Catalog, Bundle, Name, Epoch, Version, Release, and Arch columns.

summary (sum)

 

Shows a summary of available updates for each catalog.

update (up) [catalog] [...]

 

Downloads and installs updates. With no arguments, this installs updates for all subscribed 
catalogs. Provide the catalog name to keep the updates specific to the mentioned catalogs. For 
single bundles or packages, use 

rug install

. If you are not subscribed to a catalog, there 

are no updates available, even if you list the catalog as an argument; you must subscribe to 
install updates. Accepts the following option flags: 

-d, --download-only - Only downloads packages. 
-t, --type - Specifies type of updates.
--skip-interactive - Skips interactive updates.
-g, --category - Specifies the category of patches to update.
-N, --dry-run - Tests and displays, but does not actually perform the requested actions.
-i, --confirm - Prompts for confirmation.
-y, --no-confirm - Does not prompt for confirmation.
--agree-to-third-party-licences - Automatically agree to third party licences.

verify (ve) [options]

 

Verifies system dependencies. If system dependencies are not satisfied, rug suggests removal or 
installation of packages necessary to resolve conflicts. Accepts the following option flags: 

-N, --dry-run - Tests and displays, but does not actually perform the requested actions. 
-i, --confirm - Prompts for confirmation.
-y, --no-confirm - Does not prompt for confirmation.

what-conflicts (wc) [package-dep]

 

Lists packages that conflict with the item you specify. 

what-provides (wp) [querystring]

 

Displays packages that provide the library, program, or package that you specify as 

[querystring]

.

Summary of Contents for ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008



































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008

Valcom VIP-102B Configuration Manual preview
VIP-102B
Brand: Valcom Pages: 5
Allied Telesis AlliedWare Plus 5.2.1 Software Reference Manual preview
AlliedWare Plus 5.2.1
Brand: Allied Telesis Pages: 1294
Nortel Quality Monitoring Reference Manual preview
Quality Monitoring
Brand: Nortel Pages: 22
R&S FSV-K7 Operating Manual preview
FSV-K7
Brand: R&S Pages: 262
Hitachi Dynamic Link Manager User Manual preview
Dynamic Link Manager
Brand: Hitachi Pages: 746
Sharp REACH User Manual preview
REACH
Brand: Sharp Pages: 16
Sharp AR-P17 Software setupg guide Software Setup Manual preview
AR-P17 Software setupg guide
Brand: Sharp Pages: 22
Sharp Qtopia Desktop Operation Manual preview
Qtopia Desktop
Brand: Sharp Pages: 39
Sharp FO-NS2 Operation Manual preview
FO-NS2
Brand: Sharp Pages: 43
Sharp AR-NB2A Online Manual preview
AR-NB2A
Brand: Sharp Pages: 48
Sharp MXUSX5 - Desk - PC User Manual preview
MXUSX5 - Desk - PC
Brand: Sharp Pages: 91
Sharp e-Copy ShareScan OP 3.0 Configuration Manual preview
e-Copy ShareScan OP 3.0
Brand: Sharp Pages: 144
Sharp PenCell IQ-9B01 Operation Manual preview
PenCell IQ-9B01
Brand: Sharp Pages: 247
Oce PRISMAweb XMPie PersonalEffect User Manual preview
PRISMAweb XMPie PersonalEffect
Brand: Oce Pages: 22
Oce PRISMAspool User Manual preview
PRISMAspool
Brand: Oce Pages: 392
Symantec ALTIRIS SECURITY EXPRESSIONS Datasheet preview
ALTIRIS SECURITY EXPRESSIONS
Brand: Symantec Pages: 4
Symantec ALTIRIS IT MANAGEMENT SUITE 7.0 MR1 - S V1.0 New Features Manual preview
ALTIRIS IT MANAGEMENT SUITE 7.0 MR1 - S V1.0
Brand: Symantec Pages: 13
AMX AXWire Instruction Manual preview
AXWire
Brand: AMX Pages: 16

Brands by name

Popular brands

Load more brands