background image

11 

Noventri Eco-Series User Guide 

SF-100E-0160-01 REV 03 

                            

•    

Enter the IP Address or Hostname of the computer where the 

Noventri 

                                   Server™ 

software is installed and the Port number separated by a colon. 

 

Example:

 192.168.0.200:20940 

 

•    

The computer that has 

Noventri Server™

 installed must have a STATIC 

IP Address (not DHCP) for the SF-100e

 

to be able to access it consis-

tently. If necessary, have your network administrator set up a STATIC IP 
Address for you. 

 
                                  

Note:

 If you reset your SF-100e back to its Factory Defaults the 

NOVENTRI SERVER will not be changed. (see 

Factory Defaults 

section of this Manual) 

                        

5.8.8     MAC  ADDRESS

 – The MAC Address is shown for reference only and cannot    

be changed. The manufacturers assign a unique address to every network 
adapter. 

 

5.8.9     SERIAL  NUMBER

 – The serial number is shown for reference only and cannot 

be changed. This lets us identify each SF-100e, when it was built, and which 
batch it came from. 

 

5.8.10 NEW PASSWORD

 – If you would like to change the default password of the 

SF-100e, enter the New Password here. 

            
                      

Note:

 If you are unable to log in to your SF-100e, you can reset it back to 

the default. (See 

Factory Defaults 

section of this Manual) 

 

5.8.11 RE-ENTER PASSWORD

 – If you entered a New Password, enter it again here 

for verification. Click the 

SUBMIT

 button to apply the changes. 

 

5.8.12 SUBMIT

 – Once you are done making changes, you will need to save them. 

Click the 

SUBMIT

 to apply the changes. (This will take a moment.) 

 

5.8.13 CANCEL

 – To exit without saving any of the changes you made, click CANCEL 

to be returned to the login page. 

 

5.8.14 DEFAULTS

 – To restore the default settings for the SF-100e, click the  

            DEFAULTS button. (see 

Factory Defaults 

section of this Manual) 

 

5.8.15

 

REBOOT

 – To reboot the SF-100e, click the 

REBOOT

 button. This will take 

about 2 minutes to boot back up. The Configuration screen will start counting 
down 120 seconds and will return to the login page when done. 

 
 
 
 
 
 

Summary of Contents for SF-100e















Reviews: