SF200 Manual
SF200E-0160-01 REV 03
Diane Smith
4/15/13
Page 22 of 27
6.6.8 MAC ADDRESS
– The MAC Address is shown for reference
only and cannot be changed. The MAC
Address is a unique address assigned at the
factory.
6.6.9 SERIAL NUMBER
– The serial number is shown for
reference only and cannot be changed.
6.6.10 NEW PASSWORD
– If you would like to change the default
password of the SF-200 from “noventri” to
something new. Enter your new password
here.
Note:
If you forget your password and are unable to
log into your SF-200, you can reset it back to
Default
password of “noventri” by using the
optional
Remote Control
.
(See the
Remote Control
section of this
manual)
6.6.11 RE-ENTER PASSWORD
– If you entered a new password,
enter it again here for verification.
6.6.12 SUBMIT
– Once you are done making changes, you will
need to save them by selecting SUBMIT. The
SF-200 may Reboot, depending on what
changes were made.
If you changed the SF-200 IP Address, the
Web App will automatically direct you to the
new IP Address.
6.6.13 CANCEL
– To exit without saving any of the changes you
made, click CANCEL to be returned to the
login page.
6.6.14 DEFAULT
– To restore the SF-200 to DHCP enabled, and
to reset the password back to “noventri” select
the DEFAULT button. The SF-200 will then
Reboot for the changes to take effect.
The Web App will then automatically direct you
to the new IP Address.