NOVENTRI SF-200, Manual

SF200 Manual

SF200E-0160-01 REV 03 

Diane Smith 

4/15/13 

Page 23  of  27

 
 
6.6.15 REBOOT 

–   To reboot the SF-200, click the REBOOT  

button.  
 

6.7 

Once the SF-200 is 

NOVENTRI SERVER

 is Configured correctly  

you will be able to access it through Noventri Server/Suite software  
and Publish to it. 
(See the 

Noventri Manuals - Design/Schedule/Manage

) 

http://www.noventri.com/forum/viewforum.php?f=36

7. Stand-Alone Usage (Sneakernet) 

 
Note:  

If the Suite version used to create the project is newer than the  
SF-200 firmware version, the Sneakernet Drive will automatically  
update the SF-200 firmware, first, before the project begins to play. 

If the Suite version used to create the project is older than the  
SF-200 firmware version, the SF-200 may not play the Project. 
Download the latest Noventri Suite software from the Noventri  
Forum, install it, and use this Suite software version to create and 
Publish your Project to the USB Drive. 

http://www.noventri.com/forum

7.1  

When using the SF-200 as a stand-alone (Sneakernet) player, the  
Noventri Server is not needed. 
 

7.2  

Use the Noventri Suite to create a project with sequences  
of images that you want to publish to the SF-200.  
(See the 

Noventri Manual -  Design

) 

http://www.noventri.com/forum/viewforum.php?f=36

7.3 

Remove the USB Drive from the SF-200 and install it into the  
USB port on your computer where the Noventri Suite software is 
installed. 
 

7.4 

Publish the Project to the USB Drive, this will save the project you  
created onto the USB Drive. 
(See the 

Noventri Manual -  Design

) 

http://www.noventri.com/forum/viewforum.php?f=36