11/08 Rev. 5.01-01
USER MANUAL
Safety Instructions
LA-BO
4
Operational safety of the unit
Proper usage
Applicators of type LA-BO are additional units for Avery Dennison print-and-
apply or labelling heads. The applicators take self-adhesive labels from the
dispenser mechanism and stick these onto moving or non-moving products.
The company operating the unit must install it with suitable equipment to pro-
tect operating personnel from danger; for example, the danger of hands or
fingers being crushed by reaching in between the product and the dispensing
edge.
Protection against
injuries by electri-
cal current
Applicators of type LA-BO operate using low voltage 24 V DC supplied by
Avery Dennison print-and-apply or labelling heads.
WARNING!
Improper usage of the unit can cause accidents, property damage and pro-
duction downtime!
«
Only use the unit in accordance with the instructions specified in this manual.
«
Only configure the unit in accordance with this manual and with the required
care.
«
Only use original accessories.
«
Do not make any modifications or alterations to the unit.
«
Repairs to the device may only be performed by authorised specialists who
are aware of the risks involved.
WARNING!
«
Never connect the LA-BO unit directly to mains voltage!
«
Only operate the unit once the housing has been reassembled properly.
«
Before cleaning, switch off the Avery Dennison print-and-apply or labelling
head and remove the power cable from the socket.
WARNING!
The unit is not protected against splashing water.
«
Keep the unit dry.
«
If liquids have penetrated the LA-BO unit, switch the Avery Dennison print-
and-apply or labelling head off and disconnect or unplug it’s power cable im-
mediately. Inform a service technician.
