5
Set Up
Align handle and frame holes at the ideal
height, and then insert the bolt (from inside
the frame) and push until fully inserted. Ensure
the bolt head fits securely within the hexagonal
frame hole.
Place washer on bolt (curved face against
frame), screw on the Star Knob and tighten
firmly. Please note, the Star Knob should be on
the outside of the frame.
Insert the backrest
Place the padded backrest into the brackets
on the top rear of the frame. Press buttons on
backrest to click into place.
Check brake function
Make sure the brakes are working properly
before using the wheeled walker. Push down
firmly to ensure the brake stoppers are pressing
on the ground.
