3
Unfold the wheelchair
To unfold the wheelchair, place on a stable
surface and stand behind the wheelchair.
Use both hands to press down on the outer
edges of the seat frame to unfold. It may help
to gently tilt the wheelchair back to lift the
front wheels off the floor. Once open, press
firmly to make sure cross brace is locked.
Set Up
Secure the backrest
Place the backrest over the back straps of the
wheelchair with the padded foam cushion facing
forwards. Push firmly to ensure the hook and loop
fastener is securely attached both back and front.
Pull the bottom flap under the back of the
seat and push firmly to secure the hook and
loop fastener attachment. This closes any gap
between the seat and the backrest.
Secure the seat cushion
Place the seat cushion onto the wheelchair, with
the zip towards the back of the seat and the
angled edge facing forwards.
Make sure the attachment strips are aligned and
push firmly to ensure the hook and loop fastener
is securely attached.
Attach the footrests
With the footrest at a 90° angle to the chassis
(ie swung outwards), attach the footrest by
aligning the two holes at the top of each footrest
with the corresponding hinge pins on the chassis
frame, and push down firmly to insert.
Now swivel the footrest inward to lock into
position, and fold down the footplates.
