Put the needle and any empty NovoLog
®
Mix 70/30 FlexPen
®
or any
used NovoLog
®
Mix 70/30 FlexPen
®
still containing insulin in a sharps
container or some type of hard plastic or metal container with a screw
top such as a detergent bottle or empty coffee can. These containers
should be sealed and thrown away the right way. Check with your
healthcare provider about the right way to throw away used syringes
and needles. There may be local or state laws about how to throw away
used needles and syringes. Do not throw away used needles and
syringes in household trash or recycling bins.
The NovoLog
®
Mix 70/30 FlexPen
®
prevents the cartridge from being completely
emptied. It is designed to deliver 300 units.
M. Put the pen cap on the NovoLog
®
Mix 70/30 FlexPen
®
and store the NovoLog
®
Mix 70/30 FlexPen
®
without the
needle attached (see diagram M).
FUNCTION CHECK
If your NovoLog
®
Mix 70/30 FlexPen
®
is not working the right way, follow
the steps below:
Screw on a new NovoFine
®
needle
Remove the big outer needle cap and the inner needle
cap
Do an airshot as described in “Giving the airshot before
each injection”.
Put the big outer needle cap onto the needle. Do not
put on the inner needle cap.
Turn the dose selector so the dose indicator window
shows 20 units.
Hold the NovoLog
®
Mix 70/30 FlexPen
®
so the needle is
pointing down
Press the push-button all the way in.
The insulin should fill the lower part of the big outer needle cap (see
diagram N). If NovoLog
®
Mix 70/30 FlexPen
®
has released too much or too
little insulin, do the function check again. If the same problem happens
again, do not use your NovoLog
®
Mix 70/30 FlexPen
®
and contact Novo
Nordisk at 1-800-727-6500.
Maintenance