NVC-401C, NVDN-401C 1.0 version - User’s manual
All rights reserved © AAT Holding sp. z o.o.
12
INSTALLATION
In order to enter the menu press the joystick down, which results in executing
ENTER
command. For choosing the submenus please move the joystick into
UP, DOWN
positions. If
a
symbol is present, enter particular sub-menu by pressing the joystick, which is associated with
executing the
ENTER.
command. To change the parameters use the LEFT and RIGHT joystick
positions. In order to leave the menu select EXIT and press ENTER. To exit submenu please select
RETURN position, and press ENTER. Selecting (via left/right joystick movement) END in the
ENTER position closes the menu and leaves to main camera view.
5.1. Main menu
In order to enter the menu press the SET button. The following main menu is displayed on the
screen:
Menu - First page
Menu - Second page
Choosing NEXT/BACK option result displaying other page of the menu.
All changes take effect immediately. However, to save settings permanently choose SAVE ALL
and press SET button. Otherwise changes that have been made are temporary and will be cancelled
once the camera restarts.
Attention: To restore factory default, choose CAMERA RESET option, on the second page of the
menu and press SET button.
5.1.1. LANGUAGE submenu
This menu is used to select the language of the OSD menus. Select to set the language between
chinese, english, japanese, german, french, russian, portuguese, spanish.
5.1.2. LENS submenu
This submenu allows for setting the lens parameters. Because of used lens, settings in this
submenu don’t affect on displaying screen. Please let it in default option - MANUAL.
SETUP MENU
LANGUAGE
ENGLISH
LENS
AUTO
SHUTTER/AGC
AUTO
WHITE BAL
ATW
PICT ADJUST
NR
DAY/NIGHT
AUTO
NEXT
EXIT
SAVE ALL
SETUP MENU
BACKLIGHT
OFF
ATR
ON
PRIVACY
ON
MOTION DET
ON
CAMERA ID
OFF
SYNC
INT
CAMERA RESET
BACK
EXIT
SAVE ALL
