NVC-401C, NVDN-401C 1.0 version - User’s manual
All rights reserved © AAT Holding sp. z o.o.
17
USTAWIENIA
DETECT SENSE (0-127) Adjusts the sensitivity for detecting motion. A higher value is more
sensitive.
BLOCK DISP
(ON/ENABLE/OFF) Enables or disables displaying luminance highlighted
blocks for the area where the motion is detected.
MONITOR AREA (ON/OFF) Displays four windows as programmed in sizes and positions. If the
motion is detected window is blinking;
AREA SEL (1,2,3,4/4) defines the monitoring frame to be set.
TOP/BOTTOM/LEFT/RIGHT sets the monitoring frame of selected area.
5.1.12. CAMERA ID submenu
This menu is used to set camera ID which can be displayed on the screen. When the ON<
┘
is
selected, click SET to bring up the CAMERA ID sub-menu for further settings.
Title may consist of up to 52 characters (2 rows with 26 char.) Please select desired characters from
the virtual keyboard, which becomes available after pressing SET.
←
,
→
,
↑
,
↓
Moving the cursor in the direction of the arrow.
CLR
Select to clear one letter of the input.
POS 8
Adjust the position of the camera ID.
RETURN
Exit from edit mode.
5.1.13. CAMERA RESET option
Click to restore all the settings to the default values.
CAMERA
ABCDEFGHIJKLMNOPRSTUV
WXYZ0123456789-!”#$%&’
()_’,;<=>?@\^*.x+/
CHR1 CHR2
←→↑↓
CLR POS
RETURN
