N1040i Indicator
NOVUS AUTOMATION
6/7
OUTPUT ALARM1
: .....................Relay SPDT; 240 Vac / 30 Vdc / 3 A
OUTPUT ALARM2
: ........... Relay SPST-NA; 240 Vac / 30 Vdc / 1,5 A
RETRANSMISSION OF PV
: ................................................................
.................................. 0-20 mA / 4-20 mA / 500
max. / 12.000 levels
24 Vdc SOURCE
: .................................. 24 Vdc (±10 %) / 20 mA max.
CASE
:
.................................................. Polycarbonate (PC) UL94 V-2
BACK PANEL
: ....................................................... ABS+PC UL94 V-0
ELECTROMAGNETIC COMPATIBILITY
: ............... EN 61326-1:1997
and EN 61326-1/A1:1998
SAFETY
: .......................... EN61010-1:1993 and EN61010-1/A2:1995
ADEQUATE CONNECTIONS FOR TERMINALS OF THE CLAMP
TYPE;
STARTS OPERATION
: after 3 seconds connected to the power
supply;
CERTIFICATIONS
:
and
.
IDENTIFICATION
N1040i -
A -
B -
C
A
: Outputs Features
RR
2 relays available (ALARM1 / ALARM2)
RA
1 relay and one analog output 0-20 / 4-20 mA
RE
1 relay and one auxiliary 24 Vdc voltage source
B
: Digital Communication
485
RS485 available
C
: Power Supply Features (POWER)
Blank
100 a 240 Vac/dc
24V
12 a 24 Vdc / 24 Vac
F
24 a 240 Vac/dc
SAFETY INFORMATION
Any control system design should take into account that any part of
the system has the potential to fail. This product is not a protection or
safety device and its alarms are not intended to protect against
product failures. Independent safety devices should be always
provided if personnel or property are at risk.
Product performance and specifications may be affected by its
environment and installation. It’s user’s responsibility to assure
proper grounding, shielding, cable routing and electrical noise
filtering, in accordance with local regulations, EMC standards and
good installation practices.
SUPPORT AND MAINTENANCE
This product contains no serviceable parts inside. Contact our local
distributor in case you need authorized service. For troubleshooting,
visit our FAQ at
www.novusautomation.com
.
LIMITED WARRANTY AND LIMITATION OF
LIABILITY
NOVUS warrants to the original purchaser that this product is free
from defects in material and workmanship under normal use and
service within one (1) year from the date of shipment from factory or
from its official sales channel to the original purchaser.
NOVUS liability under this warranty shall not in any case exceed the
cost of correcting defects in the product or of supplying replacement
product as herein provided and upon the expiration of the warranty
period all such liability shall terminate.
For complete information on warranty and liability limitations, check
appropriate
section
in
our
web
site:
www.novusautomation.com/warranty
.
