NV-DVR1004 / NV-DVR1004NET ver. 1.0 - User’s manual
All rights reserved © NOVUS Security Sp. z o.o.
26
DEVICE MENU
4.4 Alarm setup
In
ALARM SETUP
menu following settings can be adjusted:
Buzzer settings:
(1)
BUZZER DWELL:
This option is used to select buzzer dwell time after alarm detection
(2)
VIDEO LOSS ALARM:
If this option is set to ON, buzzer will be turn on in case of video loss
(3)
MOTION ALARM:
If this option is set to ON, buzzer will be turn on in case of motion
detection
(4)
EXTERNAL ALARM:
If this option is set to ON, buzzer will be turn on in case of external
alarm
Relay settings:
(1)
VIDEO LOSS ALARM:
If this option is set to ON, relay will be activated in case of video loss.
(2)
MOTION ALARM:
If this option is set to ON, relay will activated in case of motion detection
(3)
EXTERNAL ALARM:
If this option is set to ON, relay will be activated in case of external
alarm
EXTERNAL SENSOR SETUP:
This option is used to configure alarm inputs. Each input can be set
up as normal open, normal close and inactive
ALARM DISPLAY MODE:
If this option is set to ON, fullscreen video will be displayed from
channel where alarm was detected.
ALARM SETUP
[BUZZER]
BUZZER DWELL
1SEC
VIDEO LOSS ALARM
ON
MOTION ALARM
ON
EXTERNAL ALARM
OFF
[RELAY]
VIDEO LOSS ALARM
OFF
MOTION ALARM
ON
EXTERNAL ALARM
ON
EXTERNAL SENSOR SETUP
ALARM DISPLAY MODE
OFF
EXIT