NV-DVR1004 / NV-DVR1004NET ver. 1.0 - User’s manual
All rights reserved © NOVUS Security Sp. z o.o.
28
4.6 Event List
When
EVENT LIST
is entered system history is available. The system registry stores events recorded
from the time of the last HDD formatting. The events are divided according to the time of occurrence.
Newest events are displayed as first. In the case when there are more events then can fit on one page
additional events are displayed on following system registry pages.
Information is divided in columns;
The first column contain event number, the second - event date, the third - event time, the fourth -
the event camera number, (-- this sign means that selected event concerns entire system).
In the fifth column specific shortcut describing event type is placed:
−
MOT CH1
motion detection activation on channel 1
-
RECORD
recording initiation
−
ALM CH1
alarm on the alarm input on channel 1
−
PWR
system reboot due to power failure
On the middle of the screen there is info about which HDD Event list concerns (MASTER or SLAVE).
Pressing QUAD toggles between HDD’s.
NOTICE: Event List can store only latest 64 events for each HDD. You should set
MOTION
EVENT MIGRATION
as
OFF
to store more important logs (e.g. power off) for longer
time. In other case last 64 motion detection logs will replace more important events.
DEVICE MENU
EVENT LIST
HARD DRIVE: MASTER
START TIME: 2005/MAY/10 15:20:16
END TIME: 2005/MAY/10 15:27:33
01 RECORD
2005/MAY/10 15:20:16
02 RECORD
2005/MAY/10 15:30:05
03 MOT CH1
2005/MAY/10 16:49:51
PRESS [UP, DOWN] TO MOVE [RIGHT] TO PLAY
[QUAD] TO CHANGE HDD [MENU] TO EXIT
