NV-DVR1004 / NV-DVR1004NET ver. 1.0 - User’s manual
All rights reserved © NOVUS Security Sp. z o.o.
40
SPEED DOME CAMERA - CONNECTION AND CONTROL
9.2 Camera Control
To enter camera control mode specific camera should be selected which we wish to operate and set
display to full screen mode and then press button
In the upper right corner sign
PTZ
will appear informing that Multiplexer is set to Speed Dome
Camera control mode and that some of buttons are now active as a Speed Dome control buttons.
Control is done in a „step” way which means every button press will execute one step of particular
function e.g. pan move.
When
MENU
button is pressed special PTZ menu will appear. Using this menu camera pan and tilt one
of 6 speed levels may be defined. Each level represents how “long” the “step” is. The higher level
number is, the bigger elementary movement is done.
Scan function is not available in cameras described above.
To exit PTZ menu
MENU
button should be pressed.
To exit PTZ camera control mode button
should be pressed. Sign
PTZ
will disappear from the
screen and Multiplexer will return to normal working mode (buttons will activate standard functions)
>UP-DOWN SPEED: 1
LEFT-RIGHT SPEED: 1
AUTO SCAN SPEED: 1
PROTOCOL TYPE: PELCO-D
PTZ SETUP
Icon
Function
Rew Search
Zoom out
Play
Zoom in
Tilt up
Tilt down
Pan right
Pan left