Hardware Installation Guide of MPG Capture Card
© Copyright 2005, Novus Security Sp. z o.o. All rights
Page 11
4.
RS-232 to RS-422/RS-485 Converter:
This is the converter for controlling of Pan/Tilt Device.
1.
Connect the cable to computer serial Port.
2.
You can select one of the three Power connectors.
1 : Power from Capture Board(+5V) 1
2 : Power from System Power Supply 2
3 : Power from System Power Supply 3
3.
Connect data line from camera to this port.
4.
Set the jumper switch as guidance for RS-422 Pan/Tilt
5.
Set the jumper switch as guidance for RS-458 Pan/Tilt