All rights reserved © AAT Holding S.A.
8
NVR
-
4408P8
-
H1/F User’s manual (short) ver.1.0
NVRs support 1 x 3,5" SATA HDD. Follow the instruction to mount the HDD. Photos are illustrative,
may differ slightly from the described recorder.
Before staring the process make sure the power supply is not connected.
In order to mount HDD, unscrew 5 screws on the back and both sides as depicted below and remove
top cover.
Mounting place is highlighted below. Put the HDD in the place marked below. During this operation
insert the hard disc to connect it to the connectors on the motherboard. Be carefull not to damage the
recorder motherboard.
STARTING THE DEVICE
HDD