TagTemp-S
NOVUS AUTOMATION
4/12
Fig. 02
– Initial Screen of the Application
Fig. 03
– NFC Communication
After starting the application (see
Fig. 02
), simply bring the
smartphone closer to the
TagTemp-S
(see
Fig. 03
) until the data in
the register has been transferred. This typically takes a few seconds,
but depends on the smartphone model used.
The application has six screens:
1.
Device Status
2.
Device Configuration
3.
Events and Occurrences
4.
Data Charts
5.
Preferences
6.
Download
5.2.1
Device Status Screen
Fig. 04
– Device Status Screen
•
Last recorded value
: Shows the value of the last recorded
made by
TagTemp-S
. It does not always equal the current
temperature.
•
Loggings
: Indicates basic information about
TagTemp-S
.
Log interval
: Indicates the value defined of the interval
between each acquisition.
Loggings
: Indicates the number of records made by
TagTemp-S
.
Logging state
: Indicates hether the log is running, stopped or
waiting for loggings to start
– Start Delay.
Memory usage
: Indicates the memory usage mode (full or
circular).
•
Battery
:
Indicates the status of the battery charge.
Good
: Perfect to use.
Medium
: Significant discharge is already detected. It should be
monitored.
Low
: The battery is discharged. In this case, you will not be able
to send new settings or continue recording the temperature.
•
Device Info
:
Indicates some specific information of
TagTemp-S
.
Device tag
: Identification the name chosen by the user.
Model
:
TagTemp-S
.
Serial Number
: Serial number engraved factory.
UID
: Unique Identification Number. Useful for tracking applications.
Firmware version
: Device firmware version number.