TAGTEMP logger
NOVUS AUTOMATION UK TEL: + 44 (0) 870 321 8522 FAX: + 44 (0) 870 321 8523 web: www.novusautomation.co.uk email: Sales@NovusAutomation.co.uk | 6/7
Interval
: Defines the interval between readings: hour, minutes
and seconds. When the logging mode is set to the
instantaneous
the minimum interval is 1 second. For
maximum
and
minimum
values, the minimum interval is 10 seconds in
both models.
Misc
: Shows the Logging Mode parameter that defines how
measured value will be logged. Options are:
Instantaneous
: The value logged will be exactly the value
measured at each interval. Measurement is taken at the end
of the defined interval. The minimum interval between
measurements is 1 second.
Minimum
: The value logged will be the minimum value
found within ten consecutive measurements taken within an
interval. The minimum interval between measurements is 10
second.
Maximum
: The value logged will be the maximum value
found within ten consecutive measurements taken within an
interval. The minimum interval between measurements is 10
second.
Alarms
: Enables an alarm that is triggered according to user-
defined parameters. Values shown in the temperature unit
selected.
Figure 14 – PDA Alarm Settings screen
Clocks
: Provides access to Logger and PDA clocks. When a
new configuration is sent to the logger, clocks are updated.
Offset
: allows fine offset adjustment on the measured value. The
Reset
button clears changes made and the logged values are
the measured values again.
Figure 15 – Offset adjust screen
After configuring clocks in the
Settings
screen, click
Apply
to send
this configuration to the Logger, returning to the
Monitoring
screen.
Sending a new configuration implies the
exclusion
of all data
collected present in the logger memory.
7.3
DOWNLOADING DATA FROM THE LOGGER
In the
Monitoring
screen, the
Download
button performs the
transfer of the data from de LogBox to the PDA. Download can be
partial and it does not interfere in the ongoing acquisition process.
The data base of loggings is displayed in the
Recorded Data
screen,
identified with the name assigned to the process (
Data Title
) and the
date it was downloaded.
Should the PDA batteries be discharged, all readings will be lost.
7.4
FILE VISUALIZATION
The
Recorded Data
screen lists the data base logged and stored in
the PDA. To access data, select the desired data base and press
Details
.
Recorded Data Details
screen shows several information
about the data base.
View Data
shows in table format the logged values and the date and
time they were performed.
Press
Delete
to erase the selected data base.
7.5
TRANSFERRING DATA TO YOUR DESKTOP
HotSync
of data stored in a PDA with the Desktop is performed
through a conduit installed together with the LogChart Palm-OS. The
conduit converts the data collected by the LogChart Palm-OS to a file
compatible with the LogChart-II software.
To access the conduit options, the
HotSync Manager
software must
be active. Click on the HotSync Manager in the Windows taskbar.
Select in the drop-down menu the option
Custom.
Select
Novus
LogChart Conduit
and click
Change.
The following window will be
exhibited:
Figure 16 – LogChart Conduit options
Handheld overwrites Desktop
:
LogChart Palm-OS
files are
transferred to the Desktop.
Save in
: Choose a directory to record files generated during data
synchronization.
Leave Data on Palm
: Option to keep or delete the data in the PDA
after HotSync.
Do nothing
: Data synchronization will not be performed;
Set as default
: The same settings will be used in the next
HotSync
processes.
8
MOST FREQUENTLY FOUND PROBLEMS
The LED is not flashing
: The LED flashing light is intentionally
weak, and it can be difficult to see it in clear environments, certify it is
really not flashing.
Communication with the logger fails
:
Make sure the COM port is selected correctly and there is no other
program using the same port during communication attempts;
Make sure there is no physical obstacle blocking the infrared signal;
Make sure the cable is well connected to the PC port;
Make sure the port selected does not present any problem;
9
SPECIAL CARE
When handling the device and its battery, observe the following:
•
When the device is opened, avoid touching the electronic
components and the printed circuit board to avoid electrostatic
discharge damages.
•
Pay close attention to battery polarity.
•
When closing, the cover and its sealing must be mounted
correctly and carefully to ensure the enclosure sealing.
