Using the R-Net PC programmer to configure Omni, Port 1 SID has to be set to
proportional.
To use the Click sensor of the GyroSet Vigo to activate menu functions on the Omni, Port 1
User control has to be set to
Menu and Return To Drive.
WARNING The Omni can be put to sleep by selecting that option in the User Menu. To
wake the Omni, the following SID sequence is required: Left, Right, Left, Right. Note,
this waking method only works if the Omni has been put to sleep via the User Menu.
For that to work “Sleep 12V” parameter has to be turned off to allow the GyroSet Link to operate
constantly. For safe operation of the chair Now Technologies doesn’t recommend the
Summary of Contents for GyroSet Cubo
Page 9: ......