GyroSet™ Toolbox
Successful firmware update screen
This screen only comes up if you have more than one network created in the application.
(OR if the one network you have is a Two-Dongle network and you’ve not had a chance to
update both Dongles in one go.)
Important:
● You will also end up on this screen:
○ if you only have one network and that network is a Two-Dongle network (a.k.a.
‘Full network with an extra Mouse’) and you’ve not had a chance to update
both Dongles in one go.
○ if you have multiple networks but the network you just updated is a Two-Dongle
network and you’ve not had a chance to update both Dongles in one go.
● In these cases an extra ‘Update remaining devices’ button appears, allowing you to
update your other Dongle right away in case you have it at hand.
If you only have one network, you’ll be redirected to the Home screen after a successful
firmware update.
To carry on with updating another network, press the ‘Update another
network’ button!
To set up a reminder in your calendar for running the update on other
devices or other networks on a later date, press ‘Set up a reminder’!
Press ‘Back to home’ to return to the Home screen!
47
