13
PRINTED CIRCUIT BOARD (LAMINATE):
1x electronics board
2x front wheel
-
contains parts: F1
(circumferential
and central part)
, F2
(circumferential and central part)
,
F3, F4 - three identical pieces, F5, F6, F7
2x rear wheel
- contains parts: B1
(circumferential
and central part)
, B2
(circumferential and central part),
B3, B4 - three identical pieces, B5, B6, B7
1x center frame
1x upper frame
1x front roof frame
1x rear roof frame
1x front lower part
1x rear lower part
1x side part
1x front upper part with windows
1x rear upper part with windows
1x door
- left and right part
Roof
- longitudinal parts: 1 (1x), 2 (2x), 3 (2x)
Roof
- transverse parts: 4 (1x), 5 (1x), 6 (6x), 7 (1x), 8 (1x)
33
INTERIOR:
1x lower part of the front seat
1x front seat
1x front seat backrest
1x upper partition between the seats
1x center seat backrest
1x center seat
1x lower part of the center seat
1x back seat backrest
1x upper partition behind the backrest
1x rear seat
1x lower part of the rear seat
1x board for headlights
1x board for rear lights
1x table top
1x table leg
2x part for fixing the front bumpers
Front bumper
- 3x wider bumper shape,
1x narrower bumper shape, 2x part holding
the bumper parts together
Rear bumper
- 3x bumper,
2x part holding the bumper parts together
1x steering wheel
4x part per motor shaft
1x part on the rear protrusion of the motor
1x ring part for mounting the motor
CONNECTION
:
8x screw M 2.5
x 16 (wheels)
8x nuts M 2.5
(wheels)
2x screw M 2.5
x 8
(front wheel mec chassis)
2x lock nuts M 2.5
(front wheel mec chassis)
2x screw M 2 x 8
(for servo)
2x nuts M 2
(for servo)
4x wheel rubber
2x bearing
(for front wheels)
1x servo
1x wire for the servo
1x motor
1x carbon rod for steering wheel
- 75 mm
3D PRINT:
1x front wheel mechanism
- right piece, left piece, middle piece
4x cover on the center of the wheel
2x shaft for rear wheel
1x logo
2x front light large
2x front light small
2x rear light
