background image

MMO-3 is a digital, semi-modular, monophonic but stereo synthesizer. Built around various 

types of modulation synthesis, this synthesizer is mostly dedicated to atonal sound 

generation. From fat drones, glitchy electronic patterns to percussive noise, the MMO-3 

offers rich and complex timbre control.

Overview

Unlike most FM synthesizers, the MMO-3 is not limited to a specific modulation routing. All 3 
oscillators can be modulated by all other oscillators or LFOs. Modulation parameters are 

accessible thanks to 9 knobs for an accurate and continuous adjustment of the timbre. 

Moreover, it’s not only a Frequency Modulation synthesizer : it also offers Phase Modulation, 
Amplitude Modulation and a custom Wave Shaper modulation where an oscillator amplitude 
can be amplified prior to a wave-shaper in order to add harmonics without frequency 
variation. Also, a joystick allows for easy control of modulations, for a fast and expressive 

manipulation of the sound.

Feature

This is the audio path wired inside the synthesizer. Modulation CV are routed to modulation 
fader in a digital matrix. You will not be short of cable anymore, and you can even save your 

patch!

2/15

Summary of Contents for MMO-3
















Reviews: