AUD-08 B User Manual
_______________________________________________________________________________________________________________
___________________________________________________________________________
version 1.1
page 4
2. AUD-08 B
2.1.
Components
The following items are shipped with the AUD-08 B system:
3
Audio Monitor (AUD-08 B)
3
User manual
3
System Bus cable
2.2.
System Description
The AUD-08 B unit is a acoustic monitor. It only works in combination with the EXT-02 B
system, to which it is connected via the system bus. The signal that is used for audio
monitoring is the 10-fold amplified DC signal. This signal is not high- or lowpass filtered or
further amplified, independent of the settings on the EXT-02 B front panel. Only the NOTCH
filter, if activated, is applied to this signal.
The AUD-08 B is built into a small desktop cabinet with a built-in loudspeaker and two audio
modes. In PITCH mode the voltage input signal is converted to a tone, and in NOISE mode
the signal is highpass filtered to monitor the noise. A THRESHOLD function (in NOISE
mode) can be used for masking the noise of the baseline.
2.3.
Description of the Front Panel
Figure 1: AUD-08 B front panel view
