R/I-T1DX User Manual
_______________________________________________________________________________________________________________
___________________________________________________________________________
version 1.4
page 6
2.1.
Description of the Rear Panel
Figure 2: R/I-T1DX rear panel view
The following connectors are located at the rear panel.
(1)
TO EXT-16DX connector
SubD connector for connecting the sixteen channel extracellular amplifier EXT-16DX. The
EXT-16DX amplifier provides also the operating voltage for the R/I-T1DX through this
cable.
(2)
AUX connector (optional)
Customized auxiliary connector.
(3)
TTL IN connector
BNC connector for remote control of operation with a TTL signal. As long as the signal is HI
(> +2.5V) operation (electrode resistance test or current injection) takes place.
(4)
OUT connector
BNC connector monitoring the amplitude of the injected current (1 V / 10 nA) or the
resistance (1 V / 1 M
).
(5)
MONITOR CHANNEL connector
BNC connector providing the monitor signal for the selected channel (range: -8V…+7V), e.g.
channel 0 is monitored by –8V or channel 9 is monitored by +1 V.
(6)
AUX connector (optional)
Customized auxiliary connector.
(7)
AUX connector (optional)
Customized auxiliary connector.
(8)
AUX connector (optional)
Customized auxiliary connector.
(9)
AUX connector (optional)
Customized auxiliary connector.
(10)
POWER SUPPLY PWR-03DX connector
Not connected.
