NRD USA
/ 2937 Alt Boulevard / PO Box 310 / Grand Island, NY 14072-0310
PHONE
716 773 7634 /
FAX
716 773 7744 /
sales@nrdllc.com /
WEB
www.nrdllc.com
NRD Asia Pte. Ltd
/ 114 Lavender Street #08-90 CT Hub 2 Singapore 338729
PHONE
+65 6679 1707 /
sales@NRDasia.com /
WEB
www.nrdllc.com
INST2063 – 2/19
1.0
P-2063 Ionizer
Part number: P-2063-1000 (Al) Part number: P-2063-1200 (Al)/P-2063-2200 (SST)
Used on 4064/4070
The P-2063 Ionizer is used to neutralize static electrical charges in static sensitive operations.
The Ionizer is normally placed in an atmospheric pressure air stream so that the airflow delivers
ions generated by the Ionizer to the work area. Charged parts that are placed in close proximity
to the ion cell can also be effectively neutralized without the need of air movement.
1.1
Installation & Operation
A.
One common method to install the P-2063 Ionizer is by using spring clips that
will snap on to the posts of the Ionizer. The spring clips can be attached to a
mounting base. There are other methods to mounting the cell, but cannot involve
modifying the Ionizer.
Do not alter the P-2063 in any way that may compromise the
integrity of the source. Do not drill holes, grind or file, tap
holes, etc. to the P-2063.
B.
Supply air movement through the ionizer to move the ions to the charged part. A
fan or compressed air/nitrogen can be used. For parts that can be placed in close
proximity (1”) from the grill openings, air movement may not be needed to
effectively neutralize the charged part.
