Programming Transmitters: Max 40 Channels
Transmitters can be programmed to work the following way:
1. Mode 1 - Dynamic mode ( 1 button)
Open/Stop/Close/Stop/Open......
2. Mode 2 - (2 Buttons)
Open / Close
3. Mode 3 - Courtesy Light
Light ON & OFF
Programming:
Mode 1: Dynamic
1.
Press & hold S button for 2 seconds, LED1 illuminates
2.
Press TWICE the top or top left button on the transmitter, LED1
turns off
Mode 2: Open on 1 Button, Close on another button.
1.
Press & hold S button for 2 seconds, LED1 illuminates
2.
Press top or top left button TWICE, LED1 turns off
3.
Press & hold again S button for 2 seconds, LED1 illuminates
4.
Press next channel on transmitter TWICE, LED1 turns off.
Mode 3: Lights On and Off using a spare channel:
1.
Press & hold S button for 2 seconds then press 3 more times the S
button, LED1 illuminates
2.
Press the spare channel on the transmitter TWICE.
Programming 2000 Cycles Counter Alarm
Programming Transmitters
Open / stop /close / stop / open ..........
Open and stop
Close and stop
Mode 2 - 2 channel Programming
Mode 1 - 1 Channel programming
On / off /on / off.................
Mode 3- 1 Channel lighting
