Force Reverse Programming (default set to level 2)
1. Press P for 5 seconds, LED 1, 2 & 3 will illuminate
2. Press + 4 times, LED 1 & 3 will flash
3. Press + to check the current force setting level.
4. Press + or - to toggle between force level 1 and 2.
LED
Status Meaning
LED 1 Flashes once every 3 seconds
Level 1 More sensitive
LED 1 Flashes twice every 3 seconds Level 2 More powerful
Note: Both these two forces meet the very latest EU norms for Force.
WARNING: This menu should only be used by trained professional Installers
Force reversing Programming (Professional installers ONLY).
If the garage door will not fully close and the operator requires more force to close please get in
touch with our technical department.
We advise that ONLY professional installers adjust the force level setting.
If a level above 2 is required we would suggest additional safety devices are fitted and that
force level testing is carried out after the force is set. More information on setting the
reversing force above level 2 can be obtained by contacting the Nrg Automation technical
office (professional installers only)
Programming Auto Closing & Alarm
Programming Reversing Force
12
3
S
P
+
-
Programming LED’s
