NRG USER MANUAL
SymphoniePLUS3 User Guide
SymphoniePLUS3_DataLogger_Manual
Rev. 17
support@nrgsystems.com | Page 114
31 December 2018
Running and printing the selected reports
Once you have selected all the reports you wish to run in the Main database window, click on “Run
Checked.” You should see the “Select Span for Report” window. Select the desired month or date range,
check the “preview before printing” box, and then click “OK.” SDR will then show standard status bars
as each report is generated.
Click “Print Setup” and make sure your printer selection is correct. Exit the print setup, and click “Print
and Next” to print the currently displayed report and then display the next report that has been
generated. Note that all these reports also now exist on your computer’s hard drive in the “Reports”
folder that SDR has set up.
Always make sure your site’s sensor scale factors are correct before generating reports!