NRG USER MANUAL
SymphoniePLUS3 User Guide
SymphoniePLUS3_DataLogger_Manual
Rev. 17
support@nrgsystems.com | Page 116
31 December 2018
Creating a Site File From Data File (Recommended)
The recommended way to create a new site file is to load the header for a data file from a new site. At
that point, a warning message will appear on your screen informing you that “No local site corresponds
to the one referenced in this data file! Create a new site with the data file parameters?”
Click Yes when prompted at the warning message.
This will bring you into the Site Information Editor window. The site fields will be populated with the
information passed from the logger as programmed by the field personnel. At this point, you will be able
to edit all the fields and then save the site file. You will want to have the site data sheet when creating
the new site. The site data sheet will include the information you need to enter into the site editor if
field personnel did not program the logger completely. Once the site file is saved, any raw data files
(.rwd) from the corresponding site that are converted based on this site file will use the settings stored
in the site file to create the ASCII (.txt) file. For this reason, it is essential that the information in the site
file is correct.