NRG USER MANUAL
SymphoniePLUS3 User Guide
SymphoniePLUS3_DataLogger_Manual
Rev. 17
support@nrgsystems.com | Page 47
31 December 2018
APN
-
LTE iPack users have several possible entries for the APN.
˃
Dynamic IP addresses: vzwinternet
˃
Static IP addresses: The APN varies based on the region where the SIM originated from.
ne01.vzwstatic (NorthEast)
nw01.vzwstatic (SouthEast)
so01.vzwstatic (South)
mw01.vzwstatic (MidWest)
we01.vzwstatic (West)
-
GSM iPackGPS users who are not using Windlinx will need to set the APN to whatever the
provider gives you. Please contact your service provider before NRG Systems.
˃
The format may be something like “apn.provider.com.”
Save the settings to your iPack and move to the mail settings of the .ipk file.
iPack Settings – Email Configuration
To edit each Mail Access setting, all the checkboxes must still be checked. General information regarding
each setting is provided below.
The SMTP server setting is used to send data emails from the logger.
The POP3 server is used to send patch files and firmware updates to the logger and iPack.
For iPacks with firmware version 60 or earlier, the maximum number of characters for each field is 22.
GSM iPack users with GPRS accounts may obtain the SMTP server setting from their GSM service
provider but will need to obtain access to a POP3 server through another provider.
SMTP Server Name
This is the SMTP server name that your ISP will provide and/or you can find on your ISP’s web site. It is
used to send mail from the logger. GSM iPack users with GPRS service will need to get the SMTP server
name from the cellular service provider rather than from an ISP. CDMA iPack users utilizing packet
switched connections (1xRTT) will need to make sure that the SMTP server is authenticated.
-
Enter it exactly as your ISP provided.
-
Check that there are no leading or trailing spaces in your entry.
-
WindLinx users will use an SMTP server name of: smtp.packet-mail.net