NRG USER MANUAL
SymphoniePLUS3 User Guide
SymphoniePLUS3_DataLogger_Manual
Rev. 17
support@nrgsystems.com | Page 49
31 December 2018
Mailbox Name
This is the mailbox account name your ISP provided or you selected when you set up your email account
for the iPack.
-
This is the mailbox account name on the POP3 server that the logger points to in order to retrieve
mail (patch files, for example).
-
It should be something like:
Logger or 7345552555
Mailbox Password
This is the mailbox password your ISP provided or you selected that allows access to your mailbox.
-
Enter it exactly as it is provided to you.
-
When you enter your password, it will be displayed as asterisks (*).
Internet Time Server Name
-
As part of the iPack’s calling routine, the current time (in UTC) is retrieved from a time server and
is used to update or resynchronize the clock of the SymphoniePLUS3.
-
The user must enter a local time server for the iPack to use.
˃
NOTE: for standard iPacks (rev 40 and older) the local time server must be compliant with
RFC 868 time servers that respond to requests on port 37. There are many on the
Internet, and your ISP may be able to suggest one that is RFC 868 compliant. The iPackGPS
(rev 50 and newer) uses SNTP protocol on port 123
-
Be sure to include the decimal points in the name.
-
WindLinx users will use an Internet Time Server Name of: time.packet-mail.net
-
For non-WindLinx users, this entry should look something like one of the following:
ntp.ubuntu.com
Once the information on this tab has been edited and double checked, move to the E-Mail Info tab.
iPack Settings – Mail Recipients
All the checkboxes should still be checked, and you may edit each Email Info setting. General
information regarding each setting is provided below.