SymphoniePRO User Manual
Rev. 8
support@nrgsystems.com | Page 46
11 January 2018
will disconnect after 3 hours and 20 minutes. The user can manually end the session sooner or program the
logger to disconnect as soon as automated actions are completed. Closing SymphoniePRO Desktop Application
closes all MetLink connections.
Next
The Next field shows the next date and time at which the logger will attempt a connection based on the current
schedule. The date and time are updated any time the Frequency or Time fields are changed, not just upon
saving to or loading from the logger. However, the updated settings will only take effect after they have been
saved to the logger.
Primary Host Name
The logger will first attempt to connect to the primary host, and if that fails, it will attempt to connect to the
secondary host (if one is specified). The primary host name will typically be in a format similar to
myhost.mycompany.com or it can be an IP address.
Port
The port can be configured to any port number between 0 to 65535. The default port is 30406. Consult your
network administrator to choose a port not already in use.
Test
Clicking the Test button tests the connection between SymphoniePRO Desktop Application and the Primary Host
on the designated port number.
Secondary Host Name
The secondary host name is optional. The secondary host name will be in a format similar to
host.companyABC.com. If left blank, the logger will only attempt connection to the primary host.
Port
The port can be configured to any port number between 0 to 65535. The default port is 30406. Consult your
network administrator to choose a port not already in use.
Test
Clicking the Test button tests the connection between SymphoniePRO Desktop Application and the Secondary
Host on the designated port number.
Enable Diagnostic Check-In
If the Enable Diagnostic Check-In box is checked, basic connection status information is automatically sent to
NRG Systems Technical Support. This information can be useful in diagnosing communication problems.
Test
Clicking the Test button tests the connection between the logger and NRG Systems servers. Please contact NRG
Technical Services (
) to confirm successful receipt of diagnostic information.
Summary of Contents for SymphoniePRO
