SymphoniePRO User Manual
Rev. 8
support@nrgsystems.com | Page 67
11 January 2018
If the screws aren’t already installed in the shelter box, install them now before mounting the shelter box on the
tower.
Then install the black plastic grommets, and stick the adhesive metal disks on the top of the shelter box where
the antennas will be mounted.
SymphoniePRO’s shelter box is designed to be rugged and durable to ensure long-term survival in the elements
and to protect the logger from ice falling from the tower above it.
The shelter box should be mounted in a location that is easy to access and at a height above maximum annual
snow accumulation. For tilt-up towers, you must also consider its position when the tower is tilted down and
when the gin pole is in use. It may be easiest to mount the shelter box after the tower is tilted up and then
install the wiring panel. It is recommended that you first install the wiring panel in the shelter box and connect
the sensor wires before installing the SymphoniePRO and iPack. It is recommended that you do not install the
SymphoniePRO and iPack in the shelter box until the very end of the installation process (after the tower is
raised and secured).
Summary of Contents for SymphoniePRO
