SymphoniePRO User Manual
Rev. 8
support@nrgsystems.com | Page 156
11 January 2018
Examples of Network Configurations
Direct connection with static IP addresses
This example shows the most basic network setup with an iPack directly connected to a computer running a
Modbus client. DHCP is disabled, and a fixed IP address (programmed in the iPackACCESS) is used to connect to
the Modbus client. No email is enabled, and the DNS servers are left open.
Network Configuration
Parameter
iPackACCESS
Computer
Enable DHCP:
No
No
Static IP Address
192.168.1.100
192.168.1.40
Subnet Mask
255.255.255.0
255.255.255.0
Gateway
0.0.0.0
Not used
DNS1
0.0.0.0
Not used
DNS2
0.0.0.0
Not used
Modbus Client Computer Settings:
Enable DHCP:
No
Static IP Address:
192.168.1.40
Subnet Mask:
255.255.255.0
Gateway:
Not Used
DNS1:
Not Used
LAN
SymphoniePRO
Network Status
IP: 192.168.1.100
Summary of Contents for SymphoniePRO
