SymphoniePRO User Manual
Rev. 8
support@nrgsystems.com | Page 24
11 January 2018
iPack BGAN M2M Satellite
Connecting a BGAN M2M Satellite modem to an iPackACCESS allows the SytmphoniePRO data logger to send
data from anywhere in the world using the Inmarsat Seattleite Network. See
configuring the iPackACCESS and BGAN M2M modem.
iPack Power Only
This iPack provides a “standalone” power solution to SymphoniePRO data loggers that don’t need any
communications. It contains the same 12 V rechargeable gel cell battery pack and a PV charging circuit as the
other iPacks but does not include a modem or any communication ports.
2.18 Related Hardware Accessories
A USB Type B to USB Type A (standard laptop USB connection) cable is used to configure the logger and iPack
with SymphoniePRO Desktop Application software; router and other network infrastructure may be required to
support some communication protocols.
2.2 SymphoniePRO Desktop Application Overview
2.2.1 SymphoniePRO Desktop Application
SymphoniePRO Desktop Application is used to configure the SymphoniePRO logger and iPack, communicate
remotely and upgrade instrument firmware in the field, view live data, process and store incoming data, export
data, and provide data summary reports.
SymphoniePRO Desktop Application is a 32-bit application that runs on Windows 7, Windows 8, or Windows 10
operating systems. The installer typically installs all files needed to run the software. In some Windows 8 and
Windows 10 installations, the target machine may need a Windows Update, so be sure that your network
policies allow for some external components to be installed by the desktop installer. Other operating systems
are not supported. The minimum computer hardware requirements are:
1.6 gigahertz (GHz) or faster 32-bit (x86) or 64-bit (x64) processor
2 gigabyte (GB) RAM minimum required
4 GB RAM recommended
The latest version of SymphoniePRO Desktop Application can be downloaded for free from our website:
http://www.nrgsystems.com/technical-support/software
Software installation must be performed by an administrative user. It also requires Microsoft .NET Framework,
which is distributed by Microsoft through updates (your Windows PC may already have it). If the installer
software detects that Microsoft .NET Framework is not installed, you will be prompted during the installation
process. In order to communicate with the logger, a remote MetLink connection or a MetLink USB port/USB
cable connection is required.
The software installs to the Program Files (“Program Files (x86)” for 64-bit computers) folder within the NRG
Systems folder. Site files are stored in the default folder C:\Users\...\Documents\Renewable NRG Systems. This
Summary of Contents for SymphoniePRO
