SymphoniePRO User Manual
Rev. 8
support@nrgsystems.com | Page 37
11 January 2018
3.2 Configuring Logger Channels
Logger configuration can be completed before connecting the sensors to the logger. Connect your computer
running SymphoniePRO Desktop Application to the logger using the USB cable or remote connection, and
double click the site on the Home screen. Under the Instruments section in the left navigation pane, click on the
Channels icon. The Channel Configuration screen shows the current settings saved in the logger. Changes in
configuration can be saved to the logger’s memory using the Save to Logger button, while the Load from Logger
button will revert to the settings saved in the logger. Changes to individual sensor channels and logger settings
can also be saved using the Save All button or discarded using the Discard All button (shown only when changes
are detected). Clicking the Load from Logger button restores the original settings without saving any changes.
3.2.1 Live Data
Once the logger channels are configured, sensors are connected, and a connection (remote MetLink or USB
MetLink) is established, the Live Data button can be used to toggle the live data feature on and off. Live data can
be used to verify sensor scale factors or to check sensor condition during or after a severe weather event.
Note - All sensor channel fields must be filled in before live data will be transmitted.
Turning on the live data will display instantaneous sensor measurements in scaled units. Hovering over the live
data value for each sensor will display a pop-up graph showing the measurements changing over time. Battery
voltage, and estimates of data recorded per day (total, statistical and sampled) are also displayed at the top of
the screen.
Summary of Contents for SymphoniePRO
