G-46 MDB
F
OR
YOUR
SAFETY
11
National Rejectors, Inc. GmbH, Buxtehude
2
For your safety
The 4-tube changers of the G-46 series are designed for application in
vending and service machines. They have been constructed in compliance
with the state of the art and the recognized safety regulations. Nevertheless
this equipment can be a source of danger. Therefore please follow the
safety regulations below.
Only use the coin validator for the above-mentioned purpose.
Under no circumstance can the manufacturer be held liable for
any damage or loss resulting from improper use of the device.
The changer must only be connected by a qualified electrician.
The coin validator pcb is fitted with components which may be
damaged beyond repair by electrostatic charges. Please
observe the handling instructions for components at risk due
to static.
Select the correct voltage for each changer (see label).
Never remove the coin validator's connecting cable from the
changer when it is live.
Remove the vending machine's plug from the socket before
installing, cleaning or removing the changer.
Always transport the changer without any coins in it and never
carry it by means of the cables.
Please contact NRI if you want to extend or alter the device in
a way that is not described in this guide.
Protect the changer against contact with water or any other
liquids.
Dispose of the device in accordance with environmental laws.
We reserve the right to make technical modifications to the
device which are not covered by these instructions!