G-46 MDB
R
EPAIRING
AND
EXCHANGING
COMPONENTS
47
National Rejectors, Inc. GmbH, Buxtehude
Exchanging the payout set
For the removal of the payout set
1. Remove coin validator (see chap. 5 "Installing the changer", fig. 5).
2. Remove tubes (see "Exchanging tubes" in this chapter).
3. Push side cover on the right side of the housing outwards and
remove snapped in partition (1) together with cash-box channel (see
fig. 15).
4. Push side cover on the left side of the housing outwards and remove
snapped in partition (1) (see fig. 16).
5. Remove partition and cash-box channel from the housing towards
the front.
6. Disconnect flat cable (1) between payout set and pcb (see fig. 17).
7. Simultaneously push the right and left stop levers (2) inwards and
remove the payout set (3) towards the front of the housing (see
fig. 17).
0-12V
9VA
0,8AT
0-120V
0,104V
0-120V
0,104V
0-12V
9VA
SEC
18VA
0,8AT
0-12V
9VA
0,8A T
11
0/115V
220
/2
40V
Fig. 15–17: Exchange payout set
0-12V
9VA
0,8AT
1
15
1
2
2
3
1
16
17