BA_v2_eagle_parallel_EN_1-0
47
T
echnical
DaTa
10.2.1.2
BDTA interface description
Coin lines
Coin validator signals the coin accepted in the respective coin channel (usually by one pulse, if
there are not sufficient lines by multiple pulses)
Return line
After pressing of the return lever/return button the coin validator signals opening of the
measurement and validation area
Common inhibit line
Machine inhibits coin acceptance
Single inhibit line
Machine inhibits coin acceptance in the coin channel assigned to the respective line
String line (option)
Coin validator signals a coin suspended from a string (whether the signal is received via pin 9
or 13 is determined by customized factory programming)
Memory block 1 selection line (option)
Machine loads memory block 1. (Memory block 0 = line at Low.)
With this line function, single inhibit line 6 is not available.
Memory block feedback line (option)
Coin validator signals which memory block has been activated via the memory block 1 selection
line (10 ms = block A, 20 ms = block B) or whether an error occurred during memory block
loading (30 ms).
With this line function short pulse lengths should be defined for coin signals sent
via coin line 1.
Control line for cash box/override sorting chute (option)
Machine signals that single inhibit lines 1–5 are used for cash box/override sorting chute.
With this line function single inhibit and coin line 6 is not available.
10.2.1.3
BDTA connection diagram
Fig. 16:
BDTA connection diagram
Summary of Contents for v2 eagle
Page 2: ......
