1
USER INSTRUCTIONS
NRS EASYFIT BEDGUARD
P42434
Bedguard
General Safety Warning
Please make sure that you read and follow these
instructions carefully. Failure to do so can result in
injury. Keep these instructions in a safe place for
future reference.
1.0 INTENDED USE
Figure 1: NRS Bedguard
The NRS EasyFit Bedguard is designed to prevent
users from rolling out of bed.
The bedguard has an adjustable sliding guard
mechanism, which can be extended or retracted for
easy access on and off the bed.
The bedguard can be used on divan and slatted
beds, from single to king size.
The bedguard rail section can be removed to make
bed making easy.
2.0 SAFETY
320mm
Minimum
Figure 2: Bedguard Position
WARNING: The bedguard must be positioned at
least 320mm (12.5”) away from the headboard.
The bedguard must always be positioned as close as
possible to the mattress, to prevent user entrapment.
Do not
fi
t this product to height adjustable or pro
fi
ling
beds.
The Bedguard is not designed to be used as a
bedrail. It will not support the users bodyweight.
Not suitable for use by children.
Some tasks within these instructions may require
two people.
3.0 UNPACKING
1
4
3
2
5
Figure 3: Parts
Refer to Figure 3. Remove the packaging and check
all parts carefully. Contact your supplier immediately
if parts are missing or damaged and do not try and
assemble.
Contents:
1. Base-frame
2. Bedguard
Rail
3. Bedguard Extension Rail
4. Base
Adjustment
Rail
5. Mesh
Cover
