background image

2

4.4 

For a Step Sequence:

This set-up provides a series of 2 steps, the 

fi

 rst at 

50mm (2”), the second at 75mm (3”).

Note: 

An additional set of support pillars are required 

to achieve this set up. See Section 7.0 for details.
1.  Turn two step sections upside down and lay 

fl

 at. 

These will become the base steps.

2.  Push the 8 x support pillars into position, four on 

each step section (see Figure 1).

3.  Turn the base steps over to stand on the pillars.

4.  Link the two sections together by overlapping 

the cut out section on one with the protruding lip 
on the other.

5. Push 

down 

fi

 rmly to secure.

6.  Place the additional step section on top of the 

base section.

7. Push 

down 

fi

 rmly to secure.

Note: 

To achieve a similar set up with greater height 

or more steps in the sequence, additional packs of 
steps and support pillars must be purchased.

Note: 

The safe maximum step height is 175mm (7”). 

This uses 2 packs, 6 step sections. Do not stack 
more than 6 sections together.

5. MAINTENANCE

Check that all support pillars are inserted correctly 
and any additional sections are securely 

fi

 tted.

Inspect the product regularly for signs of wear or 
damage. Any suspected faults or damage should 
immediately be reported to the supplier and the 
product taken out of use.

6. CLEANING 

INSTRUCTIONS. 

Clean regularly using a general purpose, neutral 
detergent and warm water.
Please check the suitability of the cleaning products 
before use. Do not use abrasive cleaners or cloths 
as these could permanently damage the surface and 
invalidate any warranty.
To disinfect, wipe with a dilute bleach solution and 
rinse thoroughly with fresh water.
This product can be autoclaved on cycles up to 80°C.
Allow the product to dry fully prior to use/storage.

7. 

ACCESSORIES & SPARE PARTS

M24345: Support Pillars x 4
For more details please visit our website or call 
Customer Services on the details below.

8. PRODUCT 

DISPOSAL

This product must be thoroughly cleaned/sterilised 
prior to disposal.
This product is manufactured from plastic

 

and can 

be disposed of through Local Authority Household 
Waste and Recycling Centres or through Local 
Trade Waste Collectors.

9. PRODUCT 

GUARANTEE

NRS Healthcare guarantee this product for a period 
of 12 months, from the date of purchase, against 
faulty materials and workmanship.
This guarantee does not cover; abuse, misuse, 
interference or tampering with any part of the product.
Any guarantee issued by NRS Healthcare does not 
a

 ect your statutory rights.

M11077-UI-7 09-08-2022

NRS HEALTHCARE

 Sherwood House, Cartwright Way, Forest Business Park

Bardon Hill, Coalville, Leicestershire, LE67 1UB, UK.

Tel: Customer Services: 0345 121 8111

Email: customerservice@nrshealthcare.co.uk

NRS Healthcare

 is a leading supplier of community equipment and daily living aids.

Please visit one of our websites to view our full range of products:

www.healthcarepro.co.uk or www.completecareshop.co.uk 

Reviews: