2
Note:
The height should be set for user comfort but
must allow for adequate clearance if being used
over a toilet.
4.2
Fitting the Arm Rests:
Note:
The armrests are left and right-handed,
please check the labels on the armrest. The padded
overhang should face the outside of the chair.
Attach the arms by slotting the tube inside the main
chassis frame on either side of the seat moulding.
Push and hold the button-clip, then push the armrest
down until the button-clip clicks into place.
Repeat the steps for the arm-rest on the opposite
side.
Note:
Make sure the button-clip has fully engaged
the hole and that the arm-rest is fully secure.
4.3
Fitting the Backrest:
2. Slot the backrest into the main chassis frame,
then turn the hand-wheels clockwise to secure.
Note:
Make sure the backrest is fully secure before
moving to the next step.
4.4
Fitting the Footrests:
Slot the footrests onto the studs on the main chassis
frame.
Rotate the footrest into the working position and
secure with the locking clip.
Note:
Make sure the locking clip has clicked into
place and has fully secured the footrests.
Unfold the footrests into the working position.
