3
4.5
Fitting the Commode Pan:
Slide the commode pan onto the metal runners at
the rear of the commode.
Note:
Make sure that the commode pan is fully
secure before use.
4.6
Fitting the Padded Seat Cover
Fit the padded seat cover over the moulded seat.
5. IN
USE
5.1
Adjusting the leg height (M66119 Only):
Remove the e-clip and slide the castor leg to the
desired position, then replace the e-clip to secure.
Repeat for the other castor legs.
Note:
Make sure that all castor legs have been set
to the same height.
5.2
Removing the Footrests:
Push the fastener clip to release the footrest.
Twist the footrest outwards and lift o
ff
from the main
chassis frame studs.
5.3
Adjusting the Footrest Height.
Use the spanner provided to loosen the locking nut
on the end of the tube.
Slide the inner tube to the desired height.
Use the spanner to re-tighten the nut and secure the
position.
5.4
Operating the Brakes
Push the lever down to lock the brakes.
