HuggyPRO 72 m
²
For more info,
visit our website:
www.nrsrelief.com
Lay out the frame components as shown
in the drawing.
1
Assemble one side of the roof frame.
3
Pull the roof cover over the roof frame
6
Assemble the other side of the roof frame.
4
Attach the roof cover to the roof frame
with the black Velcro straps.
7
Assemble the ridge bar.
2
Attach the front and back gable covers
to the roof frame. Use the black velcro
straps, starting from the apex.
5
Insert the roof extension poles
8
Seal the cover overlaps in the corners and
at the apex with Velcro and close the cuffs
10
Lift one side of the tent and slot the wall
poles into the roof joints. Note: the big
hole in the base plate should be facing
outwards.
11
Secure the roof extension poles by using
the Velcro straps
9
Main tent
Connect the horizontal bottom pipes to
the wall pipes. Note: twist to lock in place.
12
