www.nationalrailwaysupply.com
1-800-357-3572
3
38934B
Figure 4.1
Figure 4.2
Rack Mounting
The charger can be mounted to a
standard
Electronic
Industries
Association (EIA) 19” (483mm)
rack system using the fasteners
provided by the rack manufacturer.
The horizontal spacing of the
vertical rows of holes is specified
by EIA-310 at 18-5/16” (18.312)
(465.1mm). The mounting flanges
are configured for an EIA 19”
(483mm)
rack
for
a forward
mounting arrangement (note: the
width from the outer edge of one
mounting flange to the outer edge
of the other mounting flange is 19-
15/16”). Fasteners to match the
thread of the rack should be used
in all 7 rack mounting horizontal
slots on each of the 2 mounting
flanges (14 rack mounting slots
total) to maximize the mounting
integrity. The fasteners should be
torqued to 22 inch-pounds. The
dimensions and pattern of the
mounting flange rack mounting
slots is shown in figures 4.2 and 4.3
Figure 4.3
