Page 12 of
12
Company Confidential
January 7, 2002
Installation Guide Rev.0.3 (FCC).doc
NSM Technology Ltd.
3 FRONT
PANEL
The LED at front panel will show the status of MBS.
Upon power up, the Power LED light shall start flashing and then stay on.
The RBS LED (RBS1, RBS2, RBS3, RBS4) will flash in sequence when MBS
attempts to search and synchronize the RBS. If a RBS is available and is
synchronized, the respective RBS LED shall stays on.
The basic setup of MBS is finished now.
